Setup Two Cascade Connected Diseqc Switch

Only one IP address is required, but the network needs to be properly configured. If the Internet IP address is dynamic (very likely based on the initial post), then the modem can't be connected directly to a switch. It has to be connected to a router with NAT capabilities.Modem Router 1 Switch Router 2 (can also be connected directly to Router 1)This way Router 1 will provide access to the Internet.

1. Setup Two Cascade Connected Diseqc Switch Diagram

The Internet connection on Router 2 requires a static IP address and it's default gateway has to be Router 1. As long as routing is properly configured, it will work just fine. I've had a similar setup (with added complexity) for several years.Example:Router 1LAN IP address 192.168.1.1NAT range 192.168.1.100 - 192.168.1.120Internet IP address: Dynamic (provided by the ISP)Route traffic to network 192.168.2.0 mask 255.255.255.0 to 192.168.1.2 (the other router) or use dynamic routing (RIP has to be enabled on both routers)Router 2LAN IP addres 192.168.2.1NAT range 192.168.2.100 - 192.168.2.120Internet IP address: IP address 192.168.1.2 (connected to Router 1 or the switch)Gateway IP address: 192.168.1.1 (Router 1 IP address). I am trying to do a similar thing. My modem is connected to isp via fiber optic cable. And the modem itself has 4 ports. Port No.1 is connected via ethernet to wifi router which gets bogged down with various connections from my family of 8.

Setup Two Cascade Connected Diseqc Switch Diagram

So I decided to connect another wifi router to Port No.2 and use that personally for torrents etc so the household load is divided between two routers. But when I try to connect it it doesn't go through with the connection. Seems that only Port No.1 is accessible.

However, computers that are connected to the main router will not be able to communicate with the secondary router, and vice versa since there are two (2) different networks. NOTE: Before you connect a Linksys router to another router, make sure that both routers have different IP addresses. This is necessary to avoid conflict and connectivity.

Now I read here that having a primary router is absolutely necessary, but let's say I connect another secondary wifi router to the primary router that is plugged in Port No.1 and I torrent on the secondary one, wont it bog down the primary one anyways?What I want is two separate machines, one for torrents, one for everything else. Or else a solution to torrent peacefully.Thanks.